What is a Jet Cleaner?

 

What is a Jet Cleaner

Water Jet Cleaner is a mechanical spraying device with high-pressure water. The pressure that this tool can produce ranges from 80 to 1000 bar, depending on the needs. In everyday life this machine is usually used to clean dirt / stains that stick anywhere such as on vehicles, Air Conditioners, Floors, Concrete Surfaces, Paving Blocks, even Carpets.

Things To Look For Before Choosing A High Pressure Cleaning Machine

Before you buy a High-Pressure Water Jet Cleaning machine, it would be nice to know the things that need to be considered before using it, including:

• Find out for what needs the engine you will use, that way you can adjust the specifications for what kind of jet cleaner you need.

• Accessories you need for these needs.

• The electrical power you need, because of course if your house has a small electrical power this machine will not be able to be used optimally.

By knowing the things that need to be considered above, later you will be able to use this machine optimally and according to what you expect.

EQUIPMENT & ACCESSORIES

To optimize this tool there are several accessories that must be equipped such as:

• Spray Gun: Standard equipment whose function is for the machine's output media, usually the tip in the form of a nozzle can be adjusted for a wide or focused spray

• Soap Tubes: Some of these accessories are already installed on the machine body and some are separate, which functions as a soap reservoir, where when needed for soaping it can be done by pulling the lance for the soap tube attached to the machine and for a separate one it must be installed in the tip of the machine gun kit. Usually machines that use soap tubes work pressure greater than 40 Bar.

• Rotor Power: This tool serves to clean dirt that is difficult to clean, where the way it works is designed in such a way that the result of the spray that comes out of the gun kit is a spray in the form of a vortex so that besides spraying it forms a rotating spray.

• Nozzle (Pointing, Spraying): For the pointing type, it is used for working with a longer distance between the tip of the gun and the workpiece. Usually used on objects that are narrow or difficult to reach. As for the spraying type, it is only for ordinary work (not difficult)

• Burner: Serves as a water heater that comes out of the machine where the pressurized water that comes out of the machine is heated to a certain temperature (200 Celsius)

• Total Stop System: This equipment functions as a machine ON/OFF switch

SELECTION OF HIGH PRESSURE CLEANER

There are several things that need to be considered in the selection or use of HPC:

• What do you use the tool for?

• Required capacity requirements (pressure or flow rate)

• Equipment or accessories needed or accessories available

• How much electric power is needed

USE OF HIGH-PRESSURE CLEANER

HPC is widely used in everyday life as a cleaning tool with clean water media. The advantage of this tool is that it is much cleaner, faster and can even peel off paint or dirt or moss attached to the object being cleaned. Examples of its use in car repair shops, gardens, restaurants, factories, etc.

Check More Portable Power Station You can buy.